Dont care how much you studied,We were there and saw the boiling stop.Have you ever owned a Model A or Ford Flathead V8 ? Have you ever sawed wood with a Model A Ford saw rig?A friends father ran a sawmill with a Model A Ford engine.He bought a tractor to power the mill and gave me the A engine.It had a thermostat in it.Anyone who has a Model A Ford engine could run the test with an infra red thermometer or even a meat thermometer.Two of the friends who saw the boiling stop have restored Model A Fords.I live 250 miles away from them now.Here are the names of the men who I talked with about using a thermostat in Ford saw rigs.Joe Ribero ,Francis Landry.Richard Phelan,Harold King.All have passed on.The 32 to 36 Ford V8s used in hose thermostats.I put one in my Model A.I have demonstrated that a thermostat did stop the boiling,You have NOT. the
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
Looking 4 set 9 bolt hubs 3 1/8 inch to fit 60 to 4010 jd
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.