If it is truly a Ferguson plow, you are likely going to have difficulty. A friend gave me a "free" plow. The shares were pretty much gone. It had a 3 hole pattern on the share, with the hole closest to the point about an inch or so lower than the 2 trailing holes. I went to many different local dealers trying to find replacement shares, no one had a steel share to match it. I did find a place in Iowa that made them.....$130+ for each share - I'll pass at that price. I eventually found a local Amish family that stocked a ton of shares. She had what I needed, but only in cast iron. I took them home ($40 ea) and they bolted right on. I plan to use it when the weather cooperates, I don't know how the cast will hold up, but it was the only option I could find.
Post a pic if you can and I'll be able to see if it was like mine. I hope you have better luck than I did. Several posted to a similar question by me and suggested just getting a share and using a torch to make the necessary holes. That was going to be my next move until I found the cast iron shares.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
