Ford Tractors Discussion Board |
Re: '57 901 hydraulics?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by TomG on January 16, 2002 at 03:41:51 from (206.51.253.28):
In Reply to: '57 901 hydraulics? posted by paul m(ny) on January 15, 2002 at 21:16:45:
Connecting it would be pretty straightforward after locating the auxiliary hydraulic system pressure and return ports and the diverter valve. I don't know the tractor, but generally they are under the seat. It's just a matter of connecting the pressure and return lines to the corresponding ports on the splitter control valve. The splitter's reservoir is redundant. To use, the diverer valve is set to aux, which then pressures the splitter but not the 3ph unless the tractor has a combined manifold/diverter. There is an assumption here that the splitter valve is an open centre type. The connection is feasible and shouldn't damage the system provided the splitter valve contains a properly adjusted pressure relief valve and the tractor’s relief valve ‘sees’ the auxiliary system. The problem is that the splitter's performance is likely to be very slow. Many people say that a 10-gpm flow is needed to run typical sized splitters at acceptable speeds. That's probably why the splitter was connected to PTO pump in the first place.
Follow Ups:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|