Head over to your local Cat dealer and get some grade 9 bolts, then just keep a few spare gear boxes, pto shafts and other parts on the shelf ! :)
So much for the smart @ss comments, definitely meant to shear, best to use some consideration on what type is called for, not sure what manufacturer your is, might be possible to dig up some literature, then again might not be, had no luck finding any for my older Rhino SE-6.
Not sure, but seems rotary cutters have a lot of similarities between them, this Rhino has left hand threaded round shoulder bolts to attach the blades, that also shear off when something jambs up the works, did that once, left all the parts under the deck for me to find. It's also got the shear bolt on the p.t.o. shaft, which I'm not sure of the grade, was on it before I owned it.
All this coming from someone who is dumb enough to lose the tail wheel ( darned pin came out !) and run it over with the cutter on the return pass ! Did that last saturday, well it was getting dark.... did a number on the tail wheel, I think it bent a blade, there is a vibration, flip er over, off with the stump jumper pan again, check everything out, it's been a good one, and I took good care of it kept er greased, gear oil changed, everything tight, no leaks, probably one of the dumbest things I've done lately.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.