Ford Tractors Discussion Board |
Re: Adding remote auxiliary hydraulics to Ford 861
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Larry NCKS on September 13, 2006 at 04:40:23 from (207.200.116.67):
In Reply to: Adding remote auxiliary hydraulics to Ford 861 posted by fewlio on September 13, 2006 at 03:36:12:
That'd be the cheap way to accomplish what you want. The proper way would be to find an auxiliary valve that can be used in either single (your mower) or double (your seeder) acting mode. Ford provided these as an option way back when. You still see them pop up on eBay occasionally. There is an aftermarket available for this too, but I know little about it. These valves replace the hydraulic blockoff plate on the deck under the seat. Your operator's manual should show it. If you don't have an operator's manual, I'd suggest you get one.
Replies:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|