Another TE20 hydraulics issue

Posted by Monty J on November 23, 2010 at 03:13:19 from (110.175.149.136):

G'day

Having bit of a problem with the hydraulics on my TE20. The lever on the right to raise and lower the hydraulics springs back up and wont stay down.

When there is no implement connected (it's usually a slasher/mower) the arms raise and cant be lowered. I drained the oil and the arms dropped. I connected the slasher while the arm were down, filled it back up with oil and the arms stayed down but will not raise. The PTO engages and the slasher works fine it just wont lift

When I drained the oil from the bolt on the front right side of the transmission there was a pop and the oil squirted out. Not sure if it's suppose to do that. Note I was also draining the oil from the main bolt at the bottom of the transmission and the left rear side bolt.

Any help would be appreciated. Thanks in advance.

Cheers

Monty

Replies:

• Re: Another TE20 hydraulics issue Monty J 14:08:35 12/04/10 (0)
• Re: Another TE20 hydraulics issue Monty J 03:29:54 11/25/10 (0)
• Re: Another TE20 hydraulics issue Jerry/MT 07:46:56 11/23/10 (0)
• Re: Another TE20 hydraulics issue Jeff-oh 07:11:17 11/23/10 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]