Posted by Dan S (NY) on December 20, 2012 at 14:37:58 from (220.127.116.11):
In Reply to: Hey Inno! posted by Tony in Mass. on December 20, 2012 at 14:20:04:
If you want to remove the steering tie rods from the steering box arms, insert a piece of metal between the tie rod end nut and the transmission case. Unscrew the nut so that it starts pressing against the metal and forcing the steering box arm out away from the trans. When you have a little tension on it, hit the steering box arm with a hammer just above the tie rod end. Usually one whack will pop it loose. The trick is getting the right thickness of metal between the transmission case and the nut so that the nut is still on the tie rod end threads and pushing on the metal to get some tension.
Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.