Re: Z129 is Shot, Need Suggestions in reply to Chuck (CA), 04-12-2002 11:04:48 289 Ford V8 five bolt bellhousing will fit with some work. Did it to mine 8 years ago runs GREAT!!!!!
DKase 04-16-2002 06:35:46 204.221.160.93
Re: Re: Re: Z129 is Shot, Need Suggestions in reply to PAUL, 04-16-2002 01:40:10 It has to be a 221, 260, or 5 bolt bellhousing 289 ford engine. The 289's 65 and newer have a 6 bolt housing and that won't work. The biggest problem I had was cooling. Mine has a belly mower under it and it is a daily user. I ended up with the hood, grill, and radiator from a 930 Case diesel before my temperature problems were completly solved. I don't have a digital camera so a picture is tough. It fits in there so nice that most people don't even notice it. Takes 2 hours and less gas to mow my 7 acre lawn than the Z120 did. To explain how I fit it in would take me an hour and several pages. I'm calving now and can't take that kind of time, but I can sure answer questions between calves. I live in SD and you're welcome to come and look. I havn't had time to paint it up so it is not real pretty,but it has potential to be a showstopper!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.