Posted by Inno on October 09, 2012 at 05:44:47 from (65.95.123.154):
In Reply to: MF 35 posted by Ron Kanouse on October 08, 2012 at 14:40:15:
No, you don't have to split the tractor but you do have to remove the lift cover, the plate the seat is bolted to. It is quite heavy to lift so a chain block or another person would be helpful.
Remove the stand pipe first, remove all the attaching bolts and lift it off being careful as the controls which engage with the pump are hanging from/bolted to the bottom of it.
Once you have it apart and all the O rings replaced you will have to readjust the controls so they work properly.
John (UK) has a great set of instructions on doing this. It's not something you can do by trial and error, you must follow the directions or you risk damage to the lift system or it simply may not function correctly.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
