Posted by DON TX on September 23, 2012 at 19:14:30 from (76.196.6.124):
This TE 20 I'm working on for a friend, had the original hood that had a cut out for the gas fill and radiator fill. It was sitting on the rad not bolted/clamped front or back. The rad must not be original since it sticks up at least 2" above the hood or was modified for some reason. The oem rad seems to measure same as the ones sold here as oem. I'd like to see a pic of an oem if anyone has one. I bought a hood for a 30 that is supposed to fit a 20 but it seems to be @ an inch longer and is about 2"s higher from front bolts lining up. I'm considering fabbing a bracket to attach the front to. Any other Ideas? The oem hood is so flimsy from cracks and metal fatigue I'd rather not use it and it's missing the grill. TIA
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.