Posted by Inno on September 20, 2012 at 18:46:16 from (65.95.123.154):
Just put a freshly rebuilt carb on my 202 (Z134 Continental). It is the carb that was on the TO-35 I just bought but I put the 202 carb on the 35 to get it on the trailer and home so I figured why bother swapping them back, I'd just put the fresh rebuild on the 202. When I say rebuild I disassembled and soaked in carb cleaner for 2 days, cleaned, blew out and re-assembled with a new full kit. I had some trouble removing the idle air screw and ended up drilling it out but didn't damage the threads as far as I can tell. I re-tapped just to be sure.
So I put it on the 202, did a rough setting just to get it warmed up to operating temp. to adjust it properly. It idles great and throttles up pretty smoothly but when you have it at say half to 3/4 or even full throttle and put it under a sudden load (high gear 2nd and let the clutch out too fast or make a sudden move with the backhoe), anything that makes the governor snap the throttle quickly, it makes a little cough before revving up. Like it has to clear it's throat before it roars. It never did this with the other carburetor in place.
Any ideas? I know on the Marvel Schebler carbs they have an "accelerating well", or at least that's what I have read in an old MS document I found online. It's purpose, much like the accelerator pump on vehicle carburetors is to provide a quick shot of extra fuel for sudden acceleration. I'm wondering if this could have something to do with it?
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
