Posted by mike1972chev on December 06, 2012 at 05:16:44 from (75.149.81.173):
I am in progress of re doing my 10' #37 I H disk. About 1/2 of it's 16" cutters are wasted/trashed.They have ALL been replaced with the lighter 11 gauge cutters some time in the past. I wished I had the HEAVIER IH cutters for it!!! I was thinking of either putting the best of the remainders on the back row and buying all new 11 gauge ones for the front rows,or replacing them ALL with either 16" or 18" good ,used set of HEAVY IH brand cutters. I am just using mine for "hobby farming",so it doesnt have to be the BEST set of cutters I re install.
Anybody out there buying NEW cutters wanting to sell thier old ones to maybe help "off set" the cost of your new ones?? :)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.