Farmall & IHC Tractors Discussion Board |
#105 sickle mower
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Reid on September 10, 2000 at 21:25:27 from (192.44.136.113):
Hi fellow tractor lovers.I have a 53 super A with a 105 belly mount sickle mower on it.I've searched the archives,and the manuals ads trying to find a manual of any kind for it.No luck. Anybody out there know of a source? Also, I'd like to rebuild the steering gearbox one of these days. This is an industrial model if that makes any difference. What I was wondering was if this is a major project? Is it cost prohibitive or not? and if the end result makes it worth it. This is a good,solid old tractor, and thanks to some of you fellers advice about using laquer thinner to clean up the s/n tag I now know what year it is. Also now know my super H is a 54,400 is a 56, and I've not yet determined what the F20 is. thanks all Reid
Follow Ups:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
Looking 4 set 9 bolt hubs 3 1/8 inch to fit 60 to 4010 jd
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|