Crawlers, Dozers, Loaders & Backhoes Discussion Board |
3204 Cat leaks
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by 135 Fan on March 24, 2007 at 19:30:52 from (68.149.46.121):
I have a 931B Cat loader with a rebuilt engine from a reputable shop. The engine has had to come out twice since the rebuild for warrantee. The first time was because the teeth on the oil pump broke. The second time because it was using too much oil. They took it apart and said the rings didn't seat. It didn't burn blue at all but went through oil like crazy. Even after close to 500 hours. Now it is going through oil again and I have a couple questions. I took the side cover off on the injection pump side and there is oil and/or diesel all over the side and even on the valve cover around where the breather mounts. My breather connects at the back closet to the seat. I started it and fluid was leaking from around the throttle shaft and the cover around the throttle shaft. It used to weep just enough to attract dirt but now has a steady drip.It looked like oil because it was dark. Would it be oil or diesel leaking from there? Why would there be a lot of oil around the breather connection? The belly pan is full of oil from the leaks. I'm wondering if the injection pump is lubricated with engine oil and if maybe the problem with the oil leaks and high oil consumption is a stuck relieve valve for the oil pump that is blowing the seals out? Any advice would be greatly appreciated as I'm getting really frustrated with this machine after spending over $7000 on parts and labour. Everything was done except the injection pump because it runs great. It is a late model and doesn't have a primer pump. I hate having to fix something every 10 hours I use it. Thanks in advance for your help. Dave
Replies:
Home
| Forums
Today's Featured Article -
Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|