Oil Pressure Pic

2tractors

Well-known Member
I fixed the fe35 standard with the banjo problem after emailing John UK and finding out the original bolt had a hole down the middle instead of the flat spot so I just drilled it out.
 
Here is the pic.
a80853.jpg
 
Yep that's how the oil is suppose to go through the banjo lol just kidding i'm surprised you didn't notice it. (eyes must be getting tired)
 
So. You needed 'interior' photos. From the discription here, this engine had the wrong bolt in the oil line? ouch. I was thinking of that after I posted the pics on the other forum. if the channels in the bolt don't align with the hollow in the banjo, it will never flow. And that is exactly what was going on.... for who know's how long!
I'm glad you guys figured it out....btw, did you look at the bearings at all?
 
No I had great oil pressure before and after you said to prime it I just cut it off at the banjo and rotated, spaced and never could get it right. After John UK said the original had the hole I just drilled it out. The old line had a rusted out spot so I went to Napa and got some fexible brake line and soldered it to the banjo.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top