any tips .....

s19438 · Aug 28, 2012

on how to remove a steering wheel on a 55 to-35 without destroying the wheel? (it's keyed)
i've had em be stubborn before but never like this one.
thanks.

PackardV8 · Aug 28, 2012

is it on a taper too????? I would try a puller. Put regular nut on threads just flush with top of threads. Place puller center bolt down against nut with tension on puller bolt. Strike HEAD of puller bolt while gripping steering wheel with your knees and pull up with knees. Check key when removed to see if it has bitten into hub of steering wheel.

Jeff-oh · Aug 28, 2012

Here is an article I wrote for the Ferguson Furrows a year or so back.

Jeff
Steering Wheel Removal Article

2tractors · Aug 28, 2012

I used a three pronged puller and 3 old lawn mower blades. Bungee the blades to under side of wheel and catch them with the puller, tighten the bolt and hit with a hammer.Worked for me!!

s19438 · Aug 28, 2012

i have the same puller you have pictured but the steering wheel in your pic looks nothing like mine as mine has the spokes rubber coated and i am trying to not break up the rubber. the chain link tensioner may work, if i can find one here abouts.
i have taken more than a few steering wheels off fergusons and fords but this sucker is just plain stubborn.

Jeff-oh · Aug 29, 2012

I got mine at Home Depot or Lowes. It was only $0.79 or so. any ring like item will do.

any tips .....

s19438

Well-known Member

PackardV8

Member

Jeff-oh

Well-known Member

2tractors

Well-known Member

s19438

Well-known Member

Jeff-oh

Well-known Member

Similar threads