440 JD crawler/loader engine removal

Roger in Iowa · Jul 23, 2012

Anyone have experience on removing the engine from a 440 crawler loader. Main clutch is stuck and housing is full of mouse nest.
Looks like it will be difficult to work around loader.

Anonymous-0 · Jul 23, 2012

Block the loader in the raised position with angle iron resting on the lift rams. Then start from the front.

Roger in Iowa · Jul 25, 2012

Do I have to pull the hard nose/grill/hydraulic reservoir? Or is there enough room to pull the engine after removing the radiator?

Anonymous-0 · Aug 2, 2012

It's been a long time, but I don't recall pulling off the nose. You do have to take the pump drive off the front of the engine. Whether you need to pull the pump depends on the type of drive. If you have to pull the pump you may as well pull the nose and replace the captive nuts that fasten the belly pan on.

730d se · Aug 15, 2012

Is it gas (440 IC) or diesel (440 ICD)?
The gas has the pump made in the front of the engine. The diesel has a pump in front on the crankshaft.

440 JD crawler/loader engine removal

Roger in Iowa

Well-known Member

Anonymous-0

Well-known Member

Roger in Iowa

Well-known Member

Anonymous-0

Well-known Member

730d se

Well-known Member

Similar threads