(800) 853-2651
SHOP NOW

C301 engine swap in a 706 - carb problem?

F

Freddy

Member
Finishing up with this c301 in a 706. This Engine came out of a 715 combine with its original carb. the carb on the tractor has the inlet facing forward not backward like in the combine. Is it as simple as disassembling the carb to put the linkage on the opposite side? Need help!
 
This is a diesel to gas engine swap. This is a old worn tractor and after the freshly overhauled D282 engine broke a valve and destroyed just about everything we decided to go the cheap way we thought in fixing it.
 
Head is not clear enough this morning to see that carb , But i do not think it is as easy to flip around . . BUT if you have to get a new carb make sure that it is off a 301 as jetting differs from C263 and the C291 . The wrong carb will cause the engine to run lean and lean is mean and will destroy the engine.
 
do you have any buddies at a machine shop? just got done changing one over. you need to mill and drill the boss on the other side of the throttle shaft and the choke. it's not rocket science.
 
You must log in or register to reply here.

Similar threads

C
Carb settings with pertronix electric ignition
Replies
2
Views
260
zuhnc
zuhnc
S
560 engine swap question
Replies
3
Views
423
Dieseltech
D
O
Marvel Schebler 670 on D14 won't stop overflowing.
Replies
17
Views
569
onetotaltoolman
O
G
Almost too embarassed to post again TSX 706
Replies
16
Views
997
JMOR
J
G
Almost too embarassed to post again TSX 706
Replies
15
Views
1K
JMOR
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top