super c hydraulics

chev230

New User
I think i have a leak but cant figure out where. my resivour gets low and i have to keep adding fluid. all the hydrualic hoses and connections are good and cant find a leak anywhere. i dont use any implements with hydraulic cylinders. the only cylinder is the one to raise and lower the fast hitch wich does not leak or seep oil. i need help to find the cause of why my resivour getting low.
 
Check the engine oil level. It is probably rising. The hydraulic pump will leak into the crankcase. The pump can be removed and easily rebuilt with a speedy sleeve on the shaft and a new seal on the drive shaft. The dealer can help you or you can go to a bearing supply house with the pump disassembled.
 
Brian covered your leak problem. Hal
a130148.jpg
 

I think he posted in the wrong thread......

Yep, yep, and yep. Same thing happened to me. I hear you can rebuild it. I just bought a new pump, put it on the tractor Thursday. Problem solved. I was shocked comparing the 2 pumps. The new pump has super tight tolerances. I could barely spin it by hand. Changed out the drive gear, hooked it up and worked very well. I can't get over how responsive the hydraulics are now. Pressure is outstanding.


I went the expensive route.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top