farmall b

Anonymous-0 · Jun 17, 2013

i am looking in to buying a b farmall and the question i have is about best guestment how wide are the on the rear end i have a 7' wide trailer and i want to make sure it would fit before i drove 500 miles just to find out it wont fit. i know the reverse the wheel centers to change wheel spacing.

BARRY HOWARD · Jun 17, 2013

Besure that trailer is a full 84" inside, be prepared to remove the wheel weights if it has them. 7" no less.

gene bender · Jun 17, 2013

Wheel wts are no problem as they will clear the fenders. You dont know how they have the rears set for width as they are adjustable but normall settings it will fit. You wont know how that one is till you take some measurements and what size the tires are. I would call and find out the measurements first so you will have a jack and wrenches to move them if need be.

stumper · Jun 17, 2013

92 inches max tread to center of tires so you beter plan on changing the width but min. is 64 inches to center of tires. Can you call and have it measured before the trip,stumper

1946 BN IHC · Jun 18, 2013

Steve; not certain where you live there is a BN listed on KIJIJI near Chatham Ontario Canada He is wanting about 2500 +- says it runs well has some equipment with it. Just scanning the add.
Wm.

Dick L · Jun 18, 2013

Take blocking/cribbing. I bought an IH 100 manure spreader in the center of Kansas. Drove from Ohio to pick it up. I took a small trailer to save gas. When I got there it was a IH 200. Wife had a fit but I loaded it anyway. The fellow that I bought it from was suppose to meet me where it was located but never showed. Seems I have been in that type of deal way way to many time but with wrenches a winch and time I get er loaded.

Always comes off easier than it takes to get em loaded.

farmall b

Anonymous-0

Well-known Member

BARRY HOWARD

New User

gene bender

Well-known Member

stumper

Member

1946 BN IHC

Member

Dick L

Well-known Member

Similar threads