(800) 853-2651
SHOP NOW

Removing brake drum on an H

B

Brad in WI

Member
I am trying to remove a brake drum and it is not co-operating with me. I have the early style drum that has the the key. So far I have only tried prying it off with bars opposite of each other (worked on other side) and applying minimal heat with a propane torch. Any suggestions on what else I can do to remove the drum? I am putting in new bearings and seals so I am not worried about burning them with a hotter heat source. I do not have a puller but might be able to find one if that is the only option to get it apart.
 
Brad and if you screw the drum up I have a pair of them with the key slot in them. I am in western wi. by LaCrosse.

Bob
 
I have parted out several and have found that sometimes a wedge
driven in on two sides will do it. If you can get the whole thing to
move a bit toward you then you can put the bolt back in the drum
while leaving the retainer off and hit the head of the bolt with a
heavy hammer, which sometimes will get it started.
Zach
 
You must log in or register to reply here.

Similar threads

R
Removing rusted-on brake drums -- ideas?
Replies
19
Views
1K
rossow (mn)
R
C
Brake on a W30
Replies
5
Views
254
rustred
rustred
B
Deutz-Fahr brake disc/drum
Replies
0
Views
667
bad sector
B
M
Brake return spring on Ford 640
Replies
3
Views
707
MarkB_MI
MarkB_MI
O
D14- Brake Drum
Replies
0
Views
273
onetotaltoolman
O
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top