Monroe ez ride

Looking for base plate for the monroe ez ride seat that was aftermarket on a ford 8n.
Part number 230280

Not having luck... Am thinking it is something I could make up. Is someone willing to provide dimensions... diameter and height of edge?
 
Have you contacted Monroe? Here's an Easy Ride seat that was made in NE. Hal
a134471.jpg
 
On the other N tractor site there is an article by John Korshot on converting a 9N Monroe seat to fit an 8N. YT will not let me post a link to that site. If you can't find it, send me an email.
 
(quoted from post at 21:44:05 11/04/13) Looking for base plate for the monroe ez ride seat that was aftermarket on a ford 8n.
Part number 230280

Not having luck... Am thinking it is something I could make up. Is someone willing to provide dimensions... diameter and height of edge?

I have the same problem, this is what I made until I can find or make something more accurate.

 
(quoted from post at 22:44:05 11/04/13) Looking for base plate for the monroe ez ride seat that was aftermarket on a ford 8n.
Part number 230280

Not having luck... Am thinking it is something I could make up. Is someone willing to provide dimensions... diameter and height of edge?
easured mine and it's 9" in diameter with a 1/2" edge. It's about 1/16" thick steel. Also has a 4" long flat spot so you can move your position control lever. Hope this helps. Don
 
Perfect!
Thanks for the responses. Exactly what I needed. I'll keep my eyes open, but in the meantime can make this work..

All the best.

Frank
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top