(800) 853-2651
SHOP NOW

International 254 hydraulics

F

Frank Vantacich

Member
The neighbor has an International 254 and is unable to raise or lower his brush hog. well in looking at the lever that is supposed to raise and lower the hydraulics there is no linkage attached to it, the lever just goes back and forth but doesn't move anything. he showed me 3 broken tie wraps that came from the area and that he thinks was a substitute for the linkage but we can't make heads or tails of where it would go. If someone could please post a picture of what I am missing and of what connects to what that would be great. Thanks for the help!
 
Go to caseih.com. Select country. Top center select parts. From parts page go to second group of info and find

SEARCH FOR GENUINE CASE IH ORIGINAL PARTS
just under that pick the red words "Search for parts" in the first sentence.

Use our parts catalog to search for parts by model number or by model name.

Put 254 in the model box.
Choose 254 diesel tractor.
Choose hydraulics.
scroll down to 10-18, and 10-19
There are substantial diagrams of linkage. Jim
 
You must log in or register to reply here.

Similar threads

C
Ih 254 three point lever interfering with clutch
Replies
18
Views
440
used red MN
U
T
Hydraulics on 1982 International Harvester 254
Replies
2
Views
225
Tony K 3150
T
K
Farmall H hydraulics
Replies
13
Views
912
DeltaRed
D
olgentdc
3 point cable for 1070 needs replaced
Replies
7
Views
513
mEl
mEl
M
404 finiky lift arms
Replies
0
Views
160
Moonshade
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top