M hood question

kennell

Member
Wondering if i'm supposed to put a washer and nut on the threads sticking up through the hood by the guages? Thanks Kent
a85292.jpg
 
Beautiful paint job! Washer with wingnut is correct but most Ms I have seen have those missing including both of mine.
 
(quoted from post at 22:28:11 10/10/12) Curved washer & a wing nut
eah, curved to match the shape of the hood. I believe it was only used on tractors with the hook type hood hold-down, not the early ones with the dzus fasteners.
 
Kent - If I had that paint job I"d install a rubber-backed stainless washer, and a stianless wing-nut. Maybe chrome plated too.
 
If I had that paint job I would worry about a battery box and not a washer and wing nut. :lol: It looks good.
 
Thanks. This is my woods tractor, so i'm not worried about a battery box.I bought a battery box for my C and never installed it. Nota very fun place to work. Kent
a85371.jpg
 
I've never seen one with a washer and wing nut. I think it would look weird with them installed.

Battery boxes are overrated if you ask me. They give the tractor a clean look but contain all the gases and acids given off by the battery. The result is corroded terminals and a mess in the battery box that you have to clean out and repaint periodically.

Open air allows easy access to the battery and allows it to "breathe."
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top