Need some schoolin

Lucid · Oct 8, 2012

Hey, I am still learning and need a little help. I have my tractor's original manual (awesome), and I did pickup the I&T Shop repair manual.

I have some Qs about my rear cultivators (tool bar?) & about the front mounted cultivators for my 200. I own the rear bar pictured below but only have one cuff + wedge bolt and NO shanks. Here is where everything is murky for me. I know I need 2 more cuffs/bolts and 3 shanks. Got plenty of the shoes. I just want to make sure I will be searching for the correct parts this fall/winter.

The cuff # is 512387 R3 & looks like it takes a 1 1/4" shank size. Have no idea the # for the shanks. Would I be looking at purchasing the "200 Implements Parts Manual" to cover these Qs?

Also would the front cultivators be included in that same manual? How many shanks does it hold etc? I assume the "200 Parts Manual" will only cover parts for the tractor only...

Thanks for any help!!

Achodges1 · Oct 8, 2012

The rear toolbar should have three shanks one behind each wheel and one in the middle (two row). Most of the parts will interchange with the C or SC. The front cutivators are interchangble but since you have a fasthitch rear bar don't know if the clamps will interchange. I see the shanks on E-Bay alot. The fronts usually have 4 shanks for each row total of eight.

Lucid · Oct 8, 2012

(quoted from post at 16:16:08 10/08/12) The rear toolbar should have three shanks one behind each wheel and one in the middle (two row). Most of the parts will interchange with the C or SC. The front cutivators are interchangble but since you have a fasthitch rear bar don't know if the clamps will interchange. I see the shanks on E-Bay alot. The fronts usually have 4 shanks for each row total of eight.

Thanks for the info [b:f1e577da75]Achodges1[/b:f1e577da75], good to know more about the fronts. Kinda confusing just looking at pics online. Probably will pick up an Implement Parts manual asap funds allow. Like buying a thick programming book lol.

Lucid · Oct 8, 2012

One other thing that got me scratching my head. I see on ebay a "Middle / Row buster" like I have, but where/how does it attach to the tractor? Included a pic of one of mine I have currently.

Dean Olson · Oct 8, 2012

I have that rear cultivator assembly pictured. The parts you need
are common and I believe Agri Supply will have new chinese copies.

The front cultivator assemblies are the same for the C,SC, and the 200.

I have at least 1 complete set of cultivators and lots of extra parts. I'm just outside Houston TX.

Dean Olson · Oct 8, 2012

The manual your looking for is: FCI-1A and FCI-2. These are available at Binder books.
It covers all the mounted and fast hitch implements that fit the C,SC,& 200.

I don't think that tool bar goes on a 200. Seems to me that is for an A,SA or maybe a
cub.

Lucid · Oct 8, 2012

(quoted from post at 18:04:55 10/08/12) The manual your looking for is: FCI-1A and FCI-2. These are available at Binder books.
It covers all the mounted and fast hitch implements that fit the C,SC,& 200.

I don't think that tool bar goes on a 200. Seems to me that is for an A,SA or maybe a
cub.

Dean, much appreciate you posting those pics. Really helps me visualize.

Weird enough... I was searching the net for seed plates and found this:

Need some schoolin

Lucid

Member

Achodges1

Member

Lucid

Member

Lucid

Member

Dean Olson

Well-known Member

Dean Olson

Well-known Member

Lucid

Member

Similar threads