#60 Plow Help

tobaccoman · Oct 6, 2012

Will someone with a #60 plow(two fourteens) please measure the length of the rod running along the top of the plow(say from bend to bend) and let me know the length of it? I have a set of three fourteens and in the process of reducing it down to two bottoms and and I know that rod will have to be shortened, but don't know by how much. Trying to get ready for "Plow Day" next week. Your assistance would be greatly appreciated.

Janicholson · Oct 6, 2012

It should be exactly the same amount shorter as the plow is made shorter. Thus if the share to share distance is measured (at the same angle as the rod is running along the spine) removing that much should be exactly correct. Jim

mkirsch · Oct 7, 2012

There aren't a lot of #60's out there. I've got two of them, but they're the 3-4 bottom type so I can't help with measurements.

What I would do is get the plow all put back together, except for the rod. Lift the front with the cylinder then jack the rear up so it is setting level. Then measure how much rod you need.

That's how I did my #8 when I reduced it to two bottoms.

tobaccoman · Oct 7, 2012

Thanks for your replies, guys. I hadn't thought of those ideas. With your help, I think I can make it work!

#60 Plow Help

tobaccoman

Member

Janicholson

Well-known Member

mkirsch

Well-known Member

tobaccoman

Member

Similar threads