looking super a parts

AngeloB_1973 · Sep 30, 2012

I have a 1950 super a, and am in the begining stages of my first restoration. i have ordered cataloges from stiener and have a IT service manueal. But there are alot of parts i need such as gaskets and seals that i havent been able to find in the stiener book. can anyone give me a good contact, for ordering parts for this tractor. thanks

Mark Peters · Sep 30, 2012

Your local CaseIH dealer should be able to get most of the seals/bearings. Otherwise a bearing supply retailer can cross reference part #`s too. Good luck and have fun on your project.

Janicholson · Sep 30, 2012

At the very top of this page is a grey Box Poke it and all is well. They have a good reputation, and deliver with speed. Jim

ken house · Sep 30, 2012

most of gaskets, bearings and seals are available here locally, through auto parts supply houses.

CNKS · Sep 30, 2012

CaseIH has 99% of the gaskets, seals, and bearings. The gaskets are reasonably priced, the seals and bearings are best obtained/cheaper by crossing the IH number to SKF, National, or equivalent and buying from a dedicated seal/bearing place. NAPA may have them, most other chain auto parts places won't have them and probably won't know what you are talking about. There are a few bearings that IH made or had made that are not "generic".

gene bender · Oct 1, 2012

You can get all the seals you need at your Car Quest store just take the old one along or the dimensions. Buy som gasket material and you can make your own easy but not a head gasket of course. 20 bucks for some material and a little time will save you big bucks postage gas and so forth.

looking super a parts

AngeloB_1973

New User

Mark Peters

Member

Janicholson

Well-known Member

ken house

Member

CNKS

Well-known Member

gene bender

Well-known Member

Similar threads