Carb Adjustment Question

Tom Beddard ENC · Feb 12, 2013

I finally got all the rookie electrical errors on my 46 2N round can conversion corrected. I also put a basic rebuild kit in the TSX 33 after cleaning it many times as suggested and making sure all passages were clear. It starts easily with all carb adjustments made according to instructions on this site. I put a cultivator on and went to the field to put under load to ck it out. It would stumble now and then under really heavy load but it did not die. Can this be corrected, if so how?

HCooke · Feb 12, 2013

Open Main needle 1/4 to 1/2 turn.

Tom Beddard ENC · Feb 12, 2013

Thanks HCooke- I'll try that as soon as the weather allows. It's suppose to rain here again tomorrow.
But thankful it's not snow. 55 degrees at almost 9PM in eastern NC

Dell (WA) · Feb 12, 2013

Tom........just make certain, Cookie's 1/2-3/4 turn is in addition to yer current down-pointing mainjet setting. (you know 1+1=2) ........Dell

Tom Beddard ENC · Feb 13, 2013

Thanks Dell, it's set at 2 turns out now, just as you guys said. I'd never be at this point with this tractor without the help from everyone on this forum.

Carb Adjustment Question

Tom Beddard ENC

Member

HCooke

Well-known Member

Tom Beddard ENC

Member

Dell (WA)

Well-known Member

Tom Beddard ENC

Member

Similar threads