9n front axle

xj43

Member
rebuilding a front axle on a 41 9n and was wondering if it supposed to have some type of spacer between the axle cradle and the axle beam. I have a new bushing and pin. does the axle just slide forward and backwards in the cradle.
 
(quoted from post at 17:43:18 01/14/13) rebuilding a front axle on a 41 9n and was wondering if it supposed to have some type of spacer between the axle cradle and the axle beam. I have a new bushing and pin. does the axle just slide forward and backwards in the cradle.

Yes - it has to slide to allow for changes in wheel spacing. Are you sure you have the correct pin? It does not use the same pin as the 2N and 8N.

TOH

IMG_1184.jpg
 
Yes I have one of your pins. I ordered it a few months ago. I just finished the engine and am getting things back together. Thanks for the information and the pin is top quality. Thanks
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top