hydraulics

Johnny Stricklin · Dec 16, 2012

Drained all fluid.Put new fluid in.My lift still will not work.Need help.Thanks.

TheOldHokie · Dec 16, 2012

(quoted from post at 13:51:38 12/16/12) Drained all fluid.Put new fluid in.My lift still will not work.Need help.Thanks.

I assume it's a 9/2/8N. What doesn't work about the lift? Have you done anything in the way of diagnostics?

TOH

Johnny Stricklin · Dec 16, 2012

Its an 8n.Haven't took inspection side plate off.Tractor set outside for over a year without being started.It was full of water in tranmission.It was working when I parked it.Put 90 wt.gear oil in.Worked lift arms up by hand.Have I got maybe a stuck valve in pump?

TheOldHokie · Dec 16, 2012

(quoted from post at 19:20:30 12/16/12) Its an 8n.Haven't took inspection side plate off.Tractor set outside for over a year without being started.It was full of water in tranmission.It was working when I parked it.Put 90 wt.gear oil in.Worked lift arms up by hand.Have I got maybe a stuck valve in pump?

It could be anything - you will have to start looking. Start by taking the inspection cover off and make sure the control linkage is attached and operating the control valve. You are going to need a shop manual.

TOH

old · Dec 16, 2012

Sat for over a year with water in the system not good. If your where it gets cold you could well have broken parts from ice or you may have stuck valves or other such thing. Always best to pull the inspection plate before doing much else so as to know what is really going on

Johnny Stricklin · Dec 16, 2012

Thanks for info.Will start looking tomorrow.Thanks for your time and help.Will check back with you.

hydraulics

Johnny Stricklin

New User

TheOldHokie

Well-known Member

Johnny Stricklin

New User

TheOldHokie

Well-known Member

old

Well-known Member

Johnny Stricklin

New User

Similar threads