9N loader identification

I have recently purchased a loader for my 9N project. I looks like someone did a little hacking on it and the data plate was painted over. Does this like any make and model number that some one might have? Or know which one it is? The front mounts were poorly fabricated by someone, not the originals. I would like to get the dimensions or drawings of the right ones.
a92490.jpg

a92491.jpg

a92492.jpg

a92493.jpg

a92496.jpg
 
(quoted from post at 14:03:09 12/13/12) I have recently purchased a loader for my 9N project. I looks like someone did a little hacking on it and the data plate was painted over. Does this like any make and model number that some one might have? Or know which one it is? The front mounts were poorly fabricated by someone, not the originals. I would like to get the dimensions or drawings of the right ones.

Looks like a Wagner WM4. You can find the Wagner WM4 Manual on the N Tractor Club site. I make front hangers that will work with your loader. The WM4 hanger had a pedestal welded to the front for mounting the pump, I can provide somoething similar but not an exact suplicate - I'd like to think mine is better ;-) Feel free to call me if you'd like more information.

Dearborn/Wagner Loader Brackets

TOH
[email protected]
301.655.0631



TOH
 
It looks like the part that would attach to the three holes up front has been cut off. I have a good idea of what it should look like. I should be able to manage to make something with my welder and plasma cutter. Thanks for the help.
 
I recieved the manual but it looks like the former owner cut off the part of the loader that mounted to the front. The mount that came with it when I bought it fits between the engine and the front axle cradle. I may need to bend some pipe and fix the loader just to mount it corectly. The pump also doesn't seem right. instead of six spline it has 12.
 
(quoted from post at 02:40:18 12/24/12) I recieved the manual but it looks like the former owner cut off the part of the loader that mounted to the front. The mount that came with it when I bought it fits between the engine and the front axle cradle. I may need to bend some pipe and fix the loader just to mount it corectly. The pump also doesn't seem right. instead of six spline it has 12.

The 12 spline shaft and modifications suggest it has been hacked to fit a different model tractor.

TOH
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top