Drawbar for 9N W/O Mounting Holes

Allen Goodman · Nov 13, 2012

Guys, I seem to remember someone asked about a drawbar kit for a 9N that does not have the 4 bolt holes in the diff on the tractor forum and was refered to this side. Have a customer come in yesterday and asked if I could get him a kit. My suppliers don't have nor carry anything that would work. Sooooo, who can I contact? Thanks
(719) 440-1105

Del Huebner · Nov 13, 2012

Here is a link to The Old Hoakie. He has them.
Untitled URL Link

TheOldHokie · Nov 13, 2012

(quoted from post at 09:42:29 11/13/12) Guys, I seem to remember someone asked about a drawbar kit for a 9N that does not have the 4 bolt holes in the diff on the tractor forum and was refered to this side. Have a customer come in yesterday and asked if I could get him a kit. My suppliers don't have nor carry anything that would work. Sooooo, who can I contact? Thanks
(719) 440-1105

Call or email me or refer him to me directly. If you want more info on the bracket and how it is used here is a link to my website:

Windy Ridge Farm and Machine

TOH
301.655.0631
[email protected]

W_B · Nov 13, 2012

(quoted from post at 16:32:07 11/13/12)

(quoted from post at 09:42:29 11/13/12) Guys, I seem to remember someone asked about a drawbar kit for a 9N that does not have the 4 bolt holes in the diff on the tractor forum and was refered to this side. Have a customer come in yesterday and asked if I could get him a kit. My suppliers don't have nor carry anything that would work. Sooooo, who can I contact? Thanks
(719) 440-1105

Click to expand...

Call or email me or refer him to me directly. If you want more info on the bracket and how it is used here is a link to my website:

Old, what's the "clevis" you refer to on your site? It that the part that holds up the drawbar toward the rear of the tractor, behind the fixture in your picture? I'm trying to visualize what's there on my 8N but haven't had the drawbar on it in so long (plus my CRS is acting up again!). Might get one of these for my 9N. Can I use the 8N drawbar so i don't have to buy another one?

TheOldHokie · Nov 13, 2012

(quoted from post at 12:00:20 11/13/12)

(quoted from post at 16:32:07 11/13/12)

(quoted from post at 09:42:29 11/13/12) Guys, I seem to remember someone asked about a drawbar kit for a 9N that does not have the 4 bolt holes in the diff on the tractor forum and was refered to this side. Have a customer come in yesterday and asked if I could get him a kit. My suppliers don't have nor carry anything that would work. Sooooo, who can I contact? Thanks
(719) 440-1105

Click to expand...

Call or email me or refer him to me directly. If you want more info on the bracket and how it is used here is a link to my website:

Click to expand...

Old, what's the "clevis" you refer to on your site? It that the part that holds up the drawbar toward the rear of the tractor, behind the fixture in your picture? I'm trying to visualize what's there on my 8N but haven't had the drawbar on it in so long (plus my CRS is acting up again!). Might get one of these for my 9N. Can I use the 8N drawbar so i don't have to buy another one?

This is a picture of the under axle clevis used on the 8N and one of my brackets without a clevis. My 9N bracket can be ordered with just four drilled and tapped holes for mounting the aftermarket 8N clevis or it can be ordered with the welded pin and clevis shown in the original post. In either case you also need the aftermarket PTO drawbar support hanger and drawbar.

TOH

Drawbar for 9N W/O Mounting Holes

Allen Goodman

Member

Del Huebner

Member

TheOldHokie

Well-known Member

W_B

Well-known Member

TheOldHokie

Well-known Member

Similar threads