(800) 853-2651
SHOP NOW

Replacing Broken Main Control Spring Plunger

D

DrLarryE

Member
I need to replace the plunger. In the shop manual the plunger guide is made up of what looks like 4 pieces, the draft control spring plate and the hydraulic spring seat, which I have. I need to get a "seat, hydraulic lift draft control spring" (this is how it is listed with discount tractor parts) which was missing, and what look in the picture like a washer. Is this the "felt, spring seat" listed with the parts company? I want to make sure I get everything I need at once.
Also, I imagine it would be very difficult to reattach the control fork to the pump control valve if the sump is not emptied, correct?

Thanks
 
Probably possible. Noty easy in any case. I stradle the tractor and put one arm in each inspection port to do it. Hobo made a special tool to do it.
 
You might check with Jim.UT or John Smith for the seat you're missing.
There is a felt washer in there, I think they're about $5 new.
You can get them from this site or others. Used felt would most likely be worn out.
 
YT has the parts and I ordered them this AM...Just wanted to make sure I was ordering the right parts.
 
You must log in or register to reply here.

Similar threads

J
hydraulics/draft control
Replies
2
Views
884
Bruce(OR)
B
Josh M.
Ford 3000 draft control
Replies
9
Views
576
wp6529
W
C
Removal of Control Shaft on Hydraulic Pump
Replies
0
Views
207
CaseKernel
C
F
2N Hydraulic Pump Control Valve Assembly
Replies
3
Views
432
mhb@ufe
M
N
how to tighten the draft control spring?
Replies
9
Views
2K
jimtrs
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top