NAA oil gauge tube source

Royse

Well-known Member
Anyone have a source to get the oil gauge tube for a NAA?
It's essentially 1/8 inch steel "brake line", but I haven't been able to find it.
Book shows the part number as NAA-18676-A and/or NCA-99478-A if I'm reading it right.
I've patched mine for now, but if I could find a new one it would be nice.
 
Have you tried a local dealer? Grandville Tractor may be able to order one for you. I got alot of my parts for my NAA from them. Their phone number is 616-532-2347. ask for Bob or Dave in the Parts Department.
 
Thanks Leo, I've tried all the local parts houses, no one carries 1/8 inch.
I don't have a local CNH dealer.
I'll give Grandville a call and see what they say.
 
(quoted from post at 23:09:54 09/27/12) Any auto store has brake lines, same thing, and in different lengths. 3-5 $ each.
Thanks CharnerL, I've tried all the local parts houses. They have brake line,
but not that small. I might be able to adapt it down if necessary.
 
I searched all over for an oil line for my 600. Even tried to find the adapters to use a larger line. No luck

The only place I found one was Messicks. I think that it must be made of gold, but it works.
 
half of mine I replaced I use dthe copper 1/8 line.. the other half I used the plastic line. I like both for different applications.. would prefer steel over plastic or copper.. but they work...

auto stores have always had both in stock..
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top