GB in MT

Dave8N in Pa · Sep 25, 2012

Thank you for the drawings Gary. I will probably build one this week. Thanks again!

GB in MT. · Sep 25, 2012

(quoted from post at 08:14:23 09/25/12) Thank you for the drawings Gary. I will probably build one this week. Thanks again!

b:d25e56f0be][i:d25e56f0be]
Dave;
Took me a little time to get those to ya,....BUT, you are welcome to them!!!

GB

[/i:d25e56f0be][/b:d25e56f0be]

GB in MT. · Sep 25, 2012

(quoted from post at 08:34:52 09/25/12)

(quoted from post at 08:14:23 09/25/12) Thank you for the drawings Gary. I will probably build one this week. Thanks again!

Click to expand...

b:221eaf7d7d][i:221eaf7d7d]
Dave;
Took me a little time to get those to ya,....BUT, you are welcome to them!!!

GB [/i:221eaf7d7d][/b:221eaf7d7d]

b:221eaf7d7d][i:221eaf7d7d]

BTW:.....After building your lift, and test it for smooth operation, I would suggest, making up a saftey chain and install it as in these pix of my 2N. Will save ya from getting squashed under the tractor, as the chain keeps the leak-down factor under control, for as long as the "N" is in the "UP" pos.!!!!

GB :wink: [/i:221eaf7d7d][/b:221eaf7d7d]

Ed S. · Sep 25, 2012

Dave, I would suggest using the same type tire on both sides, unlike what Gary has on Hermie. He always had to plow snow in big left-hand circles because one side pulls better than the other...

e(couldn't resist)s

GB in MT. · Sep 25, 2012

(quoted from post at 15:38:39 09/25/12) Dave, I would suggest using the same type tire on both sides, unlike what Gary has on Hermie. He always had to plow snow in big left-hand circles because one side pulls better than the other...

e(couldn't resist)s

b:c9f4a69dec][i:c9f4a69dec]

ED;

Blessed are those, that travel in great circles, for they shall be called.......,
BIG WHEELS!!!!!! :lol: :shock: :lol:

GB :!: [/i:c9f4a69dec][/b:c9f4a69dec]

GB in MT

Dave8N in Pa

Member

GB in MT.

Well-known Member

GB in MT.

Well-known Member

Ed S.

Well-known Member

GB in MT.

Well-known Member

Similar threads