670 super Torc re-build

WNY Molines · Jul 1, 2013

I am currently re-building the Ampli-torc in my 670 super diesel.The tractor belongs in group 2 according the serial number break, and every tractor in the group has the sprague clutch that is .600" wide however after examining the one that is in the tractor now, it appears as if I need the one that is just over an inch wide. I know that AGCO does not make this part any more but was wondering if anyone knew of a place that I could find something that was a close match. I need to get this tractor back together as soon as possible.

herk · Jul 2, 2013

Hello on my 670( mine was a later model also ) I replaced my sprage clutch with one from a G 900 it was over 2 X as wide as the original and we never had trouble with it again and we used this tractor as the big tractor on a 200 acre dairy farm it ran every day of the year. try a salvage for a used one that is how I found mine , we were looking in the 670 bins and I looked in the 900 bin to compare seen it was wider and thought the wider the better.

good luck Bryan

herk · Jul 2, 2013

Hello I have had good luck getting parts from River Dale Farms 920 295 3278 Good luck Bryan

Toby Oats · Jul 2, 2013

I'll send you an Email. My brother had just rebuilt a torque from a 670 Super. So from experience it may be worth your time to check your email before ordering.

Toby

670 super Torc re-build

WNY Molines

Member

herk

Member

herk

Member

Toby Oats

Member

Similar threads