MM hydraulic cylinders

mmfun

Member
I have a MM cylinder with a 3 1/2 inch bore and a MM cylinder with a 2 1/2 inch bore what was the smaller one used for? These both have the holding valves built into them.
 
Most were on the late R's, for the cultivator lift. They could be used on any tractor that you wanted to lift a smaler implemenr quicker.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top