I am in need of a pinion gear unit with the housing and good
bearings. Needs to have the constant mesh gear and the
pinion gear on the other side. If the pinion gear is damaged
that is ok. This assembly should have the pinion gear made
onto the shaft unlike the U that is on splines or on shaft with 2
key ways. 540-890-0 two four 0.
Thanks Tim
bearings. Needs to have the constant mesh gear and the
pinion gear on the other side. If the pinion gear is damaged
that is ok. This assembly should have the pinion gear made
onto the shaft unlike the U that is on splines or on shaft with 2
key ways. 540-890-0 two four 0.
Thanks Tim