Anonymous-0
Well-known Member
I have a White 2-135 which had a new clutch and over/under put into it a couple years ago. Lately it seems as if the clutch is slipping at times and obviously it can not be a result of a bad/old clutch since it was recently replaced.
I was wondering if anyone has a copy of the tech manual and could send me a scan of it for the seciton describing the clutch adjustment OR just describe to me what the settings are suppose to be (i.e. how much pedal/linkage travel before clutch is suppose to disengage, etc.). I have a feeling the linkage may be set to tight but I don't know what the proper specs are.
Any help would be appreciated!!!
I was wondering if anyone has a copy of the tech manual and could send me a scan of it for the seciton describing the clutch adjustment OR just describe to me what the settings are suppose to be (i.e. how much pedal/linkage travel before clutch is suppose to disengage, etc.). I have a feeling the linkage may be set to tight but I don't know what the proper specs are.
Any help would be appreciated!!!