445 row crop fenders


I've got a set of fenders we took off our 1959 4 Star when upgrading to "Super" crown fenders. I believe they're identical to the 445 fenders? They're in pretty good shape. We've got them up in Holland, MI. Email me if you're interested dvandenberg at pol.net
 
I think a row crop 445 with 38" rear tires would have had the crown fenders also. I have some of the fenders off a jetstar 2 but they look like they would be too short.
 
I've never seen (nor read about) an original 445 with crown (4 Star Super/M5) fenders. Strongly doubt they were ever produced that way.

It is a matter of definition. My understanding of "crown" fenders is the ones with a distinct horizontal surface on the top...such as on the 4 Star Super and the M5. These were never available on the 445...where the fenders that were just a single curved surface.

The ones I referenced in my first reply came off a 4 Star with 38" tires...and would fit the 445...albeit the PG3 color would not match a 445 I don't think. My bro-in-law has listed them on Craigslist...they are his to sell. His listing is incorrect in that the brackets should be included. We used M5 brackets when we mounted the "Super" fenders...

http://grandrapids.craigslist.org/grd/3283466027.html
 
The parts book on a 445 list a part number for a row crop and a different number for a utility.I will do some research. Thanks
 

Chris...I have parts manual books from both tractors. As I mentioned above...the 445 Row Crop and the 4 Star standard rear fenders are both the same part. The number is 11A7396.

The 445 Utility uses much smaller rear fenders for smaller rear tires.
 

These 4 Star fenders have been reposted on Craigslist FWIW...

http://grandrapids.craigslist.org/grd/3346159608.html
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top