Duals on UTS

Clam Ons were mostly used. Also I think I have a set of cast iron hubs to fit a UTS. What size rim do you have? (Wheel Centers?) Hubs are for sale.
MMDEL
 
It is a standard, cast centers 14x30 rim. Has clampbolts hoding the rim to the center.
Do I need some sort of clamp bolt with an eye to hook the rods in for clamp on type? Then I assume I need some kind of spacer or ring between the rims? Is it just another rim like whats on it already or a special dual rim? I have seen this type of dual before but have not put them on or seen them apart. Sorry for my inexperience.
 

Yes it's another rim with a spacer welded to it. A nut with a loop is screwed onto the wedge bolt. Then you have a long bolt with a hook at the head that fits into the loop, and the other end goes through a lug, and the nut is draw ed up. I would take a picture of my, but they're not on the tractor right now. I could take a picture of the dual rim if you like.
 
Thanks J Wondergem, I didn't know it was a special rim.
I'll have to keep my eyes open for a 30" dual rim. Somehow I don't think it's going to be easy to find.
 

I made a set years ago. I bought a used set of rims, and had a machine shop roll a piece to weld inside. Made the long bolts with a hook on the end. You can buy the nuts with the eye on them to screw to the bolts that wedge your wheels on.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top