(800) 853-2651
SHOP NOW

Jubilee hydraulics

D

Dr.Bert

Member
I bought a rebuilt hydraulic pump from the old Hokie and got it hooked up, so now I have hydraulics on my Jubilee. However, I have a problem--when the draft control lever is vertical the position control lever will actuate the lift arms depending on how far down you push the position control lever. With the draft control lever placed horizontally, moving the position control lever does not actuate the lift arms. If the lift arms are all the way up, moving the position control lever causes them to drop to a desired level, but raising the position control lever to the top will not cause the lift arms to raise. What is missing, broken, or out of adjustment?? Your opinions please. Thanks
 
May need some clarification on the which lever you are referring to. Draft control/position control lever is the short lever just below the seat. The lift control lever has the aluminum knob and is used to raise and lower the lift.

That aside, your description seems to be pointing to a worn cam pin or an adjustment problem.
 
Forum: A senior moment--- I mislabeled the touch control lever as the position control lever---Poor memory. Anyway, when the lever for draft control is horizontal, moving the touch control lever down will lower the arms to any position you choose, but if the touch control lever is raised, the lift arms will not raise. Hope this clarifies my first post. Thanks to Dollar Bill for alerting me.
 
(quoted from post at 20:00:49 11/27/13) Forum: A senior moment--- I mislabeled the touch control lever as the position control lever---Poor memory. Anyway, when the lever for draft control is horizontal, moving the touch control lever down will lower the arms to any position you choose, but if the touch control lever is raised, the lift arms will not raise. Hope this clarifies my first post. Thanks to Dollar Bill for alerting me.
Click to expand...
ounds backwards...doesn't make sense to me. Even if Position control were far out of adjustment, I expect that draft control linkage would at some point of touch control lever movement take over & still lift. Probably need to remove lift cover to see what is broken or maybe out of adjustment. Hooker there is that you need to understand how linkages are supposed to work in order to recognize what/how/where they are working incorrectly.
 
You must log in or register to reply here.

Similar threads

W
Questions on Jubilee hydraulics
4 5 6
Replies
117
Views
3K
JMOR
J
R
Lift arms stuck up
Replies
7
Views
470
Red Rex
R
Josh M.
Ford 3000 draft control
Replies
9
Views
599
wp6529
W
A
Refitting the transmission cover MF240
Replies
4
Views
196
Caryc
C
B
Jubille lift arm not lowering
Replies
3
Views
332
JMOR
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top