How do I remove hyd pump on 73 3000?

Laneman · Feb 8, 2013

IT manual says to remove hydraulic manifold. I don't see a hydraulic manifold unless it takes up half the pump. The lines go straight into the pump, there is a seam in the center of the pump. Do I split the pump in half and that is the manifold? Don't want to open the pump up and have its guts spill out. I don't see any other way to remove pump manifold. In the middle of a clutch job, really need a quick answer

Laneman · Feb 8, 2013

From looking online it appears that the suction line just slips out of pump, pressure line is a flare fitting.

Ultradog MN · Feb 8, 2013

You will probably have to remove the clamp that holds the lines down by the the front of the right step plate. Then just give the suction line a jerk. It should come out.

How do I remove hyd pump on 73 3000?

Laneman

Member

Laneman

Member

Ultradog MN

Well-known Member

Similar threads