5000 lift arms won't lower

Tobacco farmer ky · Jan 30, 2013

Our 5000 has been setting around for the past year started it up today and the lift arms won"t lower also the pto won"t shut off this is an existing issue any help will be appreciated

souNdguy · Jan 31, 2013

just curious, what tranny? 8spd? sos? DP?

also.. on the pto.

with the selector in the off position.. can you use a piece of lumber pressed agains the shaft to slow and stop it.. or is it staying powered?

if it stops.. it may be a worn brake and fluid coupling. if it is powered.. could be warped discs in the clutch pack.

does that machine have aux hyds? do they work?

Tobacco farmer ky · Jan 31, 2013

Can stop pto with 2x4...8 speed trans...came out with only one hyd outlet we put duel outlets on it . Outlet pressure is 2100 psi pto pressure is about 75 psi when on nothing when off

Tobacco farmer ky · Jan 31, 2013

Can stop pto with 2x4...8 speed trans...came out with only one hyd outlet we put duel outlets on it . Outlet pressure is 2100 psi pto pressure is about 75 psi when on nothing when off

souNdguy · Jan 31, 2013

ok.. so the pto is a brake issue.

and you have hyds because the remotes work.

sounds like lift goes up but not down.. have you messed with the asc any?

Tobacco farmer ky · Jan 31, 2013

Hate to sound dum. what do you mean by asc? Lift is up i jolted it with a sledge hammer hopeing it would free up but nothing thanks

souNdguy · Feb 1, 2013

auxilery service control valve

Anonymous-0 · Feb 1, 2013

Bought a 5000 with the identical problem, Lift arms would not go down. I ended up pulling the top cover and rebuilding. bought kit on this site 30 bucks. works fine now

5000 lift arms won't lower

Tobacco farmer ky

New User

souNdguy

Well-known Member

Tobacco farmer ky

New User

Tobacco farmer ky

New User

souNdguy

Well-known Member

Tobacco farmer ky

New User

souNdguy

Well-known Member

Anonymous-0

Well-known Member

Similar threads