i tested the pressure on valve it was about 150 at low idle about190 at high idle when lver is off i get 0 pressure when tractor is off i can turn pto free i took apart break piston found larger o ring wraped up in spring i ordered new orins and arm assy for break should i get new springs to thanks for all the help Bob
- Thread starter BOBILL
- Start date
Ultradog MN
Well-known Member
- Location
- Twin Cities
Good update Bob.
Lot of new guys will come on here, ask questions and never post back so we don't know if we helped or not.
Let us know when you get the new parts in and if it works.
We're always learning here too.
Lot of new guys will come on here, ask questions and never post back so we don't know if we helped or not.
Let us know when you get the new parts in and if it works.
We're always learning here too.
Ultradog MN
Well-known Member
- Location
- Twin Cities
I tried to connect to external_link to check the price of the spring but it seems their servers are down this morning.
I guess it would depend on how much it costs.
As we talked about the other day that spring is a known failure point as the book does say it is second in line as far as troubleshooting pto problems.
If it is not too much $ I might be inclined to replace it as cheap insurance.
I did not replace mine. Just cleaned the crud out of it and it worked good after that.
I guess it would depend on how much it costs.
As we talked about the other day that spring is a known failure point as the book does say it is second in line as far as troubleshooting pto problems.
If it is not too much $ I might be inclined to replace it as cheap insurance.
I did not replace mine. Just cleaned the crud out of it and it worked good after that.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy