Gp carb help

Daninsc

Member
On my 29 gp I took the carb apart to rebuild. The needle seat came out with the threads. I put some jb weld on it but when you tighten the nut it pulls it back out. Is this repairable or what do you do about it?
 
There is some stuff that is expensive though. I've used it to put threads back in eng blocks and even in aluminum inj pump housings at the timing window screw holes. Molecular ?????? was the name I think, I will have to check. I just used some on an H carb at the fuel inlet hole.
You might also consider a heli coil if you can drill the hole straight. Is it 3/8 NF thread?
 
Cork Groth "The GP Guru" makes a insert that the seat will screw into. I had him do mine. It was the only way to fix it. He is located in Eldridge Iowa. His ph.# is 563-285-7009
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top