Roll gard decal

Anonymous-0

Well-known Member
Got a roll gard decal from Trav Jorde. He said it is off-center to one side or the other but wasnt sure which way. Does anyone have measurements or a pic of this decal in place? Thanks in advance for your help
 
Pretty sure the decal favors the right side. As far as actual measurements I am not sure. My guess is if you made an imaginary line in the center of the tractor and one at the vertical edge of the Roll-Gard, then centered the decal in that area you would be very close. Mike
 
There was one on my old 4520 I had. The right edge of the decal was almost against the right edge of the cross bar in the roll guard. Does that made any since?

Chris
 
I checked several sales brochures and here are the results.On the original introduction brochure there was no roll-guard decal only the John Deere decal centered between the posts.I also found several other early tractor pics without the roll-guard decal.On the pics of side console tractors the John Deere is centered and the roll-guard decal is underneath with the D in roll-guard under the last E in John Deere.That is what gives the offset.I found my results in several different brochures with one on rear cultivaters giving the best pics.
 
(quoted from post at 22:45:38 03/05/13) Got a roll gard decal from Trav Jorde. He said it is off-center to one side or the other but wasnt sure which way. Does anyone have measurements or a pic of this decal in place? Thanks in advance for your help
15317.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top