Canadian Ken
Member
pulled #1 cylinder exhaust valve pushrod -had a real good bend and a wear mark where it was rubbing
other pic is of the intake air rubber hose that is cracked probably due to the drying effect of long term ether use - the sharpie mark is where the intake pipe stops -the crack goes about an inch past the pipe allowing dirt to be pulled in past the filter - pulled new injectors - #1 of course was as clean as the day it was installed since both valves could not open -#4 was also clean -I think the tractor was running on #2,3,5 and 6 cylinders -will do compression tests next
Ken
other pic is of the intake air rubber hose that is cracked probably due to the drying effect of long term ether use - the sharpie mark is where the intake pipe stops -the crack goes about an inch past the pipe allowing dirt to be pulled in past the filter - pulled new injectors - #1 of course was as clean as the day it was installed since both valves could not open -#4 was also clean -I think the tractor was running on #2,3,5 and 6 cylinders -will do compression tests next
Ken