Anonymous-0
Well-known Member
I have a 300 loader that the right wheel locked up. I loosened the 12 or so bolts that hold the final drive and the wheel would turn freely by hand. Tightened the bolts back up and wheel would not spin. Took the final drive off and the hub would spin and the bull gear would spin. So I am thinking the brakes were locked up. I think when you apply pressure to the break there are two metal bands that squeeze the break disc. Well what relieves the pressure? I have taken the break lines apart and removed as much oil as possible. Is there some type of cylinder in the final drive? Thanks for any suggestions.