620 jd hyd.

bigboreG · Oct 6, 2012

Trying figure out the reason for super slow drop speed on the 620. Hooked to pull type plow with cylinder and it literally takes 20 seconds for plow to drop. Hook to different tractor, problem goes away. Any thoughts ?

Anonymous-0 · Oct 6, 2012

Are you using a one way or two way cylinder? Also are you moving the lever to full detent or just moving it enough to activate the cylinder? These answers may help us to diagnose your concerns.

bigboreG · Oct 6, 2012

Two way. And have tried both full detent and the other way. Like i said we hook up to the 630 or 730 or even the 520 and it works fine.

buickanddeere · Oct 6, 2012

Remove and Transplant the couplers between tractors and try again.

BushogPapa · Oct 6, 2012

Have you checked the lower metering adjustment, meant to adjust speed of drop...??
(Lower Rt Side, under the Rock-shaft arm)..
It may be set for a heavier piece of equipment and drop too slow for what you have on it..

Ron..

bigboreG · Oct 6, 2012

Checked the metering and was set wrong for our application. Adjusted and works fine now! Thanks all.

620 jd hyd.

bigboreG

Member

Anonymous-0

Well-known Member

bigboreG

Member

buickanddeere

Well-known Member

BushogPapa

Well-known Member

bigboreG

Member

Similar threads